Connecting To The Mains Power Supply - Avery Dennison ALS 204 Service And Installation Manual

3 I
NSTALLATION AND DEINSTALLATION
3.1 U
NPACKING
Connecting to the mains
3.1.5
power supply
WARNING!
The machine is connected with the mains
supply! Contact with energised components
can result in life-endangering currents
through the body as well as burns.
Ensure that the machine is switched off

before connecting power cable.
(ALS 20X) Only operate the machine at

the mains voltage rating set at the voltage
selection switch.
(ALS 20X) Ensure that the machine is cor-

rectly adjusted to your local supply volta-
ge.
(ALS 256) Only operate the machine

using the system voltage indicated on the
nameplate.
Only plug machine in to a correctly ins-

talled socket with an earth contact.
The length of the power cable must not

exceed 3m.
Only by disconnecting the plug from the
mains supply is the machine fully discon-
nected from the supply. Therefore:
Keep mains connection freely accessible.

(ALS 20X with splash guard) Provide a se-

parate mains power separator.
In case of danger switch off the machine

and unplug the power cable.
,
ASSEMBLING AND CONNECTING THE MACHINE
A
[31] Power supply connection (A) at the ALS 20X.
35
ALS
20X
256