Avery Dennison ALS 204 Service And Installation Manual page 159

7 E
LECTRONICS
7.6 D
ATA INTERFACES
mat as 4 bytes separated by points (e.g. 192.168.1.99).
IP addresses are assigned by whoever runs the net-
work, generally a network administrator.
MAC and IP addresses originate from different protocol
layers and are fundamentally independent from each
other.
Setting IP parameters
The following alternatives are available for setting the
IP parameters:
Fixed setting
The preset values are as follows:
– IP address: 192.168.1.99
– Net mask: 255.255.255.0
– Default Gateway: 0.0.0.0
Assigned by DHCP server
The following are requested from the DHCP server:
Address, net mask, default gateway. During the
request process, a device name is communicated to
the DHCP server, to assist the system
administrator. This name is made up of the model of
labeller + 3 characters from the MAC address.
– Example: ALS_204___020049
– It is not necessary to connect to a name server
This is where to set the IP parameters in the labeller
function menu:
Menu
INTEFACE PARA >NETWORK
PARAM.
IMPORTANT: These addresses must be assigned with
care, ensuring they are unique on each machine. Call
in your network administrator.
D
ESCRIPTION
Function Description
IP Addressassign Set to "Fixed IP address" or "DHCP"
IP address Input fields for the IP parameters, if the method of assigning
Net mask addresses was set to Fixed IP address".
Gateway address
159
ALS
20X
256