Avery Dennison ALS 204 Service And Installation Manual page 86

5 O
PERATION
5.2 T O
ANDEM
Activating the machines to dispense
Prerequisites:
– Both machines are set up as described above and
connected with the tandem interface cable.
– The master starts the labelling
Switch slave on

Switch master on

If the master is switched on before the slave,
the following error message appears:
Status num:
Tandemsynch.init
– This message appears when
communication between the master and
slave is interrupted.
– If the slave is switched on first, the message
does not appear.
On master:
– Display in master mode:
Online Master
Labels
– Display in flipflop master mode:
Online FF-Master
Labels
– The machine is ready for operation and begins la-
belling once it receives a signal from the product
sensor.
On slave:
– Display:
Online Slave
Dispenser locked
(Display alternates between this and standard
display)
PERATION
5147
292
292
86
ALS
20X
256