Avery Dennison ALS 204 Service And Installation Manual page 100

6 E
NHANCED
6.3 S /
AVING LOADING A CONFIGURATION
Example of a printout from SETUPALL.FOR
#!A1
#G Machine Setup for ALS 206 RH
#G Serial number : A637105450041
#G MAC Address : 000A.44.04.00.1D
#G-----------------------------------------------------------------------------
#G LABEL SETUP
#G-----------------------------------------------------------------------------
#PC2067/0 #G
#PC6000/13.0 #G
#PC6001/10.0 #G
#PC6002/100.0 #G
#PC6003/19.0 #G
#PC6004/15.0 #G
#PC6034/0.0 #G
#PC6017/0.0 #G
#PC6035/0 #G
#PC6036/100.0 #G
#PC6037/100.0 #G
#PC6007/1 #G
#PC6041/0 #G
#PC6015/0 #G
#PC6016/0 #G
#G-----------------------------------------------------------------------------
#G MACHINE SETUP
#G-----------------------------------------------------------------------------
#PC5050/1 #G *Dispenser type
#PC2002/0 #G
#PC2069/1 #G
#PC2065/0 #G
#PC2005/18 #G *Dispense counter : 18
#PC2006/0 #G
#PC2058/0 #G
#PC2020/1 #G
#PC2071/0 #G
#PC2068/5 #G
#PC2043/0 #G
#PC2051/1 #G
#PC2053/0 #G
#PC6010/41 #G *Sensor Adjust
#PC6005/0 #G
#PC6006/0 #G
#PC6008/500 #G
#PC6009/64.0 #G
#PC6040/1 #G
#PC6018/0 #G
#PC6020/0 #G
#PC6038/0 #G
#PC6019/500.0 #G
#PC2015/4 #G
#PC6011/1 #G
#PC6012/1 #G
#PC6013/0 #G
#PC6014/0 #G
#PC6042/0 #G
#PC6043/0 #G
#PC2044/1 #G
#PC6021/1 #G
#PC2074/80 #G
#PC6022/0 #G
#PC6028/0 #G
#PC6023/0 #G
#PC6024/15500 #G
#PC6025/15500 #G
#PC6029/15500 #G
#PC6030/15500 #G
#G-----------------------------------------------------------------------------
#G Easyplug Interpreter
#G-----------------------------------------------------------------------------
#PC1101/0 #G
#PC1102/0 #G
#PC1103/1 #G *Dispenser ID no. : 1
#PC1104/64 #G
#PC2072/0 #G
#PC2021/0 #G
F
UNCTIONS
Version: V1.34
Gap detect. mode : Manual
Dispense speed : 13.0 m/min
Slew speed : 10.0 m/min
Label pitch : 100.0 mm
Lab. stop offset : 19.0 mm
Start offset : 15.0 mm
Start offset : 0.0 mm
Product length : 0.0 mm
Multi label mode : Disabled
Label 2 offset : 100.0 mm
Label 3 offset : 100.0 mm
Miss. label tol. : 1
Miss. label mode : Compensate
Stop count. mode : Disabled
Label stop quan. : 0
: ALS 206 RH
Speed unit : Inch/s
Cover open error : Immediately
Param. data base : 0
w/wo magazine : with
Feed mode : Head up
Turn-on mode : Online
EasyPlug errors : Tolerant handl.
Foil stretching : Feedback:
Start print mode : Pulse falling
Language : English
Access authoriz. : Deactivated
: Manual
Speed Adaption : Off
Encoder Type : Single Phase
Encoder Resol. : 500 pulses/turn
Encoder Diameter : 64.0mm
Rewinder Operat. : Enabled
Tandem Operation : Disabled
Tandem Synch. : None
Slave IP address : 000.000.000.000
Tandem Distance : 500.0 mm
Light sens. type : Wenglor
Labelsen. InType : PNP
Startsen. In.Type: PNP
Start disp. mode : Pulse falling
Start error stop : Off
On inhibit enter : Do saved starts
On inhibit leave : Do saved starts
Apply key : Enabled
Material end err : On
Materialend warn : 80 mm
OD sensor mode : Off
OD Sens.polarity : Level low active
Unwinder motor : Disabled
Feed accelerate : 15500 mm/s2
Feed decelerat. : 15500 mm/s2
Rew.empty accel. : 15500 mm/s2
Rew.full accel. : 15500 mm/s2
Interface : Serial Com1
Spooler mode : Mult. print jobs
Spooler size : 64 KBytes
Offline mode : Interf. disabled
Interface delay : 0 ms
5 mm
: 41 %
13.0var
100
ALS
20X
256