Avery Dennison ALS 204 Service And Installation Manual page 155

7 E
LECTRONICS
7.5 S I
IGNAL NTERFACE
= Product will not be labelled
= Product will be labelled
Start signal
Inhibit signal
[167] Example of setting combination A1B2. Green arrow: the rising
slope causes products registered in the queue to be labelled.
Red arrow: the dropping slope causes the queue to be deleted.
= Product will not be labelled
= Product will be labelled
Start signal
B
Inhibit signal
[168] Example of setting combination A2B1.
D
ESCRIPTION
Product sensor
B
Product sensor
155
A
Two of the products are matching both conditions, in this case,
the impact of the dropping slope counts.
A B'
ALS
20X
256
Dispensing edge
B' A'
Dispensing edge
A'