Avery Dennison ALS 204 Service And Installation Manual page 37

3 I
NSTALLATION AND DEINSTALLATION
3.1 U
NPACKING
Plugging in the power lead
Ensure that the power switch [35A] is set to "O" (off).

Using the power supply cable provided, connect the

machine to a mains supply socket.
(ALS 20x with splash guard) The power supply cable is
connected by installing the splash guard.
mit Spritzwasserschutz: Das Netzanschlusskabel wird
durch aufsetzen der Abdeckhutze angesteckt.
Before installing the splash guard [36A], ensure

that...
– the machine side power switch [35A] is switched on
(position „I").
– the power switch at the splash guard [36B] is
switched off (switch doesn´ light).
,
ASSEMBLING AND CONNECTING THE MACHINE
A
[35] Power lead (B) plugged in (ALS 20X).
A
[36] Machine with splash guard.
37
ALS
20X
256
B
B