Save Changes And Exit Configuration Mode; Exit Configuration Mode Without Saving Changes; Configuration Actions - Digi Connect IT 16 User Manual

Command line interface
See Move within the configuration schema
configuration.

Save changes and exit configuration mode

To save changes that you have made to the configuration while in configuration mode, use save. The
save command automatically validates the configuration changes; the configuration will not be saved
if it is not valid. Note that you can also validate configuration changes at any time while in
configuration mode by using the validate command.
(config)> save
Configuration saved.
>
After using save to save changes to the configuration, you will automatically exit configuration mode.
To return to configuration mode, type config again.

Exit configuration mode without saving changes

You can discard any unsaved configuration changes and exit configuration mode by using the cancel
command:
(config)> cancel
>
After using cancel to discard unsaved changes to the configuration, you will automatically exit
configuration mode.

Configuration actions

In configuration mode, configuration actions are available to perform tasks related to saving or
canceling the configuration changes, and to manage items and elements in lists. The commands can
be listed by entering a question mark (?) at the config prompt.
The following actions are available:
Configuration actions
cancel
save
validate
revert
show
Digi Connect IT® 16/48 User Guide
for more information about moving within the
Description
Discards unsaved configuration
changes and exits configuration mode.
Saves configuration changes and exits
configuration mode.
Validates configuration changes.
Reverts the configuration to default
settings. See The revert command
more information.
Displays configuration settings.
Configuration mode
for
709