Configure Surelink Active Recovery For Openvpn - Digi Connect IT 16 User Manual

Virtual Private Networks (VPN)
b. Configure whether the additional OpenVPN parameters should override default options:
(config vpn openvpn client name)> advanced_options override true
(config vpn openvpn client name)>
c. Set the additional OpenVPN parameters:
(config vpn openvpn client name)> advanced_options extra parameters
(config vpn openvpn client name)>
15. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
16. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Configure SureLink active recovery for OpenVPN

You can configure the Connect IT 16/48 device to regularly probe OpenVPN client connections to
determine if the connection has failed and take remedial action.
Required configuration items
A valid OpenVPN client configuration. See
n
Configure an OpenVPN client without using an .ovpn file
Enable OpenVPN active recovery.
n
The behavior of the Connect IT 16/48 device upon OpenVPN failure: either
n
Restart the OpenVPN interface
l
Reboot the device.
l
Additional configuration items
The interval between connectivity tests.
n
Whether the interface should be considered to have failed if one of the test targets fails, or all
n
of the test targets fail.
The number of probe attempts before the OpenVPN connection is considered to have failed.
n
The amount of time that the device should wait for a response to a probe attempt before
n
considering it to have failed.
To configure the Connect IT 16/48 device to regularly probe the OpenVPN connection:

WebUI
Digi Connect IT® 16/48 User Guide
Configure an OpenVPN client by using an .ovpn file
for configuration instructions.
OpenVPN
or
291