Table of Contents
Advertisement
Command line interface
a: Admin CLI
1: Serial: port1
q: Quit
Select access or quit [admin] :
Type a or admin to access the Connect IT 16/48 command line.
You will now be connected to the Admin CLI:
Connecting now, 'exit' to disconnect from Admin CLI ...
>
See
Command line interface
Exit the command line interface
Command line
1. At the command prompt, type exit.
> exit
2. Depending on the device configuration, you may be presented with another menu, for example:
Access selection menu:
a: Admin CLI
1: Serial: port1
q: Quit
Select access or quit [admin] :
Type q or quit to exit.
Execute a command from the web interface
1. Log into the Connect IT 16/48 WebUI as a user with Admin access.
2. At the main menu, click Terminal. The device console appears.
Connect IT 16/48 login:
3. Log into the Connect IT 16/48 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
The Admin CLI prompt appears.
>
Digi Connect IT® 16/48 User Guide
(9600,8,1,none,none)
for detailed instructions on using the command line interface.
(9600,8,1,none,none)
Exit the command line interface
698
Advertisement
Table of Contents
