Get started with Connect IT 16/48
This section explains what comes with each Connect IT model, how to install the necessary software,
and how to connect the hardware.
1.
Verify product
2.
Cellular ONLY: Insert the CORE
3.
Connect the power supplies and
4.
Optional: Connect SFP+
5.
Connect the hardware to a
6.
Access the device from the web
7.
Update the firmware
8.
Change the
9. Administrators only:
or in the Connect IT's local web user interface.
10.
Mount
the Connect IT to a rack.
11.
Connect equipment to the Connect IT serial
Verify product components
Verify that you have the following included equipment.
Digi Connect IT® 16/48 User Guide
components.
module.
fans.
modules.
network.
UI.
on the Connect IT.
password.
Additional configuration
to the Connect IT can be done in Remote Manager
ports.
19