Table of Contents
Advertisement
Applications
"1": "edge"
,
"2": "ipsec"
,
"3": "setup"
,
"4": "external"
}
}
$
2. Use the DELETE method to remove the external zone (list item 4).
$ curl -k -u admin https://192.168.210.1/cgi-
bin/config.cgi/value?path=service.ssh.acl.zone.4 -X DELETE
Enter host password for user 'admin':
{ "ok": true }
$
Stop a script that is currently running
You can stop a script that is currently running by using the
Command line
1. Log into the Connect IT 16/48 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Determine the name of scripts that are currently running:
)> system script stop
0
1
>
3. Stop the appropriate script:
)> system script stop script1
>
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Digi Connect IT® 16/48 User Guide
}
script1
script2
Stop a script that is currently running
system script stop name
command.
486
Advertisement
Table of Contents
