Table of Contents
Advertisement
Services
Location information
Your Connect IT 16/48 device can be configured to use the following location sources:
Dead reckoning, by using an external USB GNSS receiver. External dead reckoning USB
n
GNSS receivers are available to be purchased separately from Digi International Inc.
User-defined static location.
n
Location messages forwarded to the device from other location-enabled devices.
n
You can also configure your Connect IT 16/48 device to forward location messages, either from the
Connect IT 16/48 device or from external sources, to a remote host. Additionally, the device can be
configured to use a geofence, to allow you to determine actions that will be taken based on the
physical location of the device.
This section contains the following topics:
Configure the location service
Use a dead reckoning external USB GNSS receiver
Configure the device to use a user-defined static location
Configure the device to accept location messages from external sources
Forward location information to a remote host
Configure geofencing
Show location information
Digi Connect IT® 16/48 User Guide
Location information
368
370
371
373
377
383
395
367
Advertisement
Table of Contents
