Delete A Lan - Digi Connect IT 16 User Manual

Interfaces
eth2
loopback
wwan
wwan
>
3. Enter show network interface name at the Admin CLI prompt to display additional
information about a specific LAN. For example, to display information about ETH2, enter show
network interface eth2:
> show network interface eth2
lan1 Interface Status
---------------------
Device
Zone
IPv4 Status
IPv4 Type
IPv4 Address(es)
IPv4 Gateway
IPv4 MTU
IPv4 Metric
IPv4 Weight
IPv4 DNS Server(s)
IPv6 Status
IPv6 Type
IPv6 Address(es)
IPv6 Gateway
IPv6 MTU
IPv6 Metric
IPv6 Weight
IPv6 DNS Server(s)
>
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Delete a LAN

Follow this procedure to delete any LANs that have been added to the system. You cannot delete the
preconfigured LAN, LAN1.

WebUI
Digi Connect IT® 16/48 User Guide
IPv6 up fd00:2704::1/48
IPv4 up 127.0.0.1/8
IPv4 up 10.200.1.101/30
IPv6 down
: eth2
: internal
: up
: static
: 192.168.2.1/24
:
: 1500
: 5
: 10
:
: up
: prefix
: fd00:2704::1/48
:
: 1500
: 5
: 10
:
Local Area Networks (LANs)
132