Table of Contents
Advertisement
Serial port
Search for a port
In the Serial Status page, you can use the Search ports search box to search for a port, or a set of
ports, that match the search entry. The search feature looks for matches in the following columns:
Status, Port, Label, and User.
1.
Access the Serial Status page
2. Enter your search entry in the Search ports field. As you type, the ports displayed in the page
are limited to only the ports with information that matches the search entry.
Serial connector pinout in reversed mode
You can configure the serial port's RJ45 connector to use the reversed mode pinout. In this pinout the
TXD and RXD pins are swapped, and the DCD pin is connected to ground. All other hardware signal pins
(such as RTS/CTS/DTR/DSR) are inactive.
To configure this option, select the
Pin
1
2
3
4
5
6
7
8
Digi Connect IT® 16/48 User Guide
in the web UI.
Reversed Mode option
on the System Configuration page.
Standard mode
CTS
DSR
RXD
GND
GND/DCD
TXD
DTR
RTS
Search for a port
Reversed mode
--
--
TXD
GND
GND
RXD
--
--
183
Advertisement
Table of Contents
