Configure Quality Of Service Options - Digi Connect IT 16 User Manual

Hide thumbs Also See for Connect IT 16:
Table of Contents

Advertisement

Firewall
  Command line
1. Log into the Connect IT 16/48 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Enable custom firewall rules:
(config)> firewall custom enable true
(config)>
4. (Optional) Instruct the device to override all preconfigured firewall behavior and rely solely on
the custom firewall rules:
(config)> firewall custom override true
(config)>
5. Set the shell command that will execute the custom firewall rules script:
(config)> firewall custom rules "shell-command"
(config)>
6. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
7. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Configure Quality of Service options

Quality of Service (QoS) options allow you to manage the traffic performance of various services, such
as Voice over IP (VoIP), cloud computing, traffic shaping, traffic prioritizing, and bandwidth allocation.
When configuring QOS, you can only control the queue for outgoing packets on each interface (egress
packets), not what is received on the interface (packet ingress).
A QoS binding contains the policies and rules that apply to packets exiting the Connect IT 16/48 device
on the binding's interface. By default, the Connect IT 16/48 device has two preconfigured QoS
bindings, Outbound and Inbound. These bindings are an example configuration designed for a typical
VoIP site:
Outbound provides an example of matching packets as they are routed from the device onto
n
the WAN interface.
Inbound provides an example of matching packets as they are routed from the device onto a
n
LAN interface.
These example bindings are disabled by default.
Digi Connect IT® 16/48 User Guide
Configure Quality of Service options
573

Advertisement

Table of Contents
loading

This manual is also suitable for:

Connect it 48

Table of Contents