Analyze Network Traffic - Digi Connect IT 16 User Manual

Diagnostics

Analyze network traffic

The Connect IT 16/48 device includes a network analyzer tool that captures data traffic on any
interface and decodes the captured data traffic for diagnostics. You can capture data traffic on
multiple interfaces at the same time and define capture filters to reduce the captured data. You can
capture up to 10 MB of data traffic in two 5 MB files per interface.
To perform a more detailed analysis, you can download the captured data traffic from the device and
view it using a third-party application.
Note Data traffic is captured to RAM and the captured data is lost when the device reboots unless you
save the data to a file. See
This section contains the following topics:
Configure packet capture for the network analyzer
Example filters for capturing data traffic
Capture packets from the command line
Stop capturing packets
Show captured traffic data
Save captured data traffic to a file
Download captured data to your PC
Clear captured data
Digi Connect IT® 16/48 User Guide
Save captured data traffic to a
Analyze network traffic
file.
674
678
679
680
680
682
683
684
673