Table of Contents
Advertisement
Serial port
Label
--------
Serial 1
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Serial Status page
The Serial Status page contains status information about all of the serial ports available on the
device.
Item
configuration icon
Search ports
Ports per page
Status
Digi Connect IT® 16/48 User Guide
Port
Enable
Mode
-----
------
-----
port1
true
login
Description
Click the (configuration) icon in the upper right corner of the page
to access the Serial Configuration page. See
port
for more information.
Use the
Search ports
page.
Select the number of Ports per page that you want to display. Click
the appropriate number or click ALL to display all ports. You can also
click Next or Back to display the next or previous set of ports.
Note
The number ports you can display is determined by the number
of ports available on the device.
Displays the connection status.
CONNECTED: A terminal, SSH, TCP, or telnet session is active.
n
NO SIGNAL: CTS or DCD is not active on the port.
n
Baudrate
--------
115000
field to limit the list of ports displayed on the
Serial Status page
Configure the serial
181
Advertisement
Table of Contents
