Table of Contents
Advertisement
System administration
Update modem firmware by using a local firmware file
You can update your modem firmware by uploading a modem firmware file to your Connect IT 16/48
device. Firmware should be uploaded to /opt/MODEM_MODEL/Custom_Firmware, for example,
/opt/LM940/Custom_Firmware. Modem firmware can be downloaded from Digi at
https://ftp1.digi.com/support/firmware/dal/carrier_firmware/. See
information about uploading files to the Connect IT 16/48 device.
1. Log into the Connect IT 16/48 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the modem firmware check command to determine if new modem firmware is available
on local device.
> modem firmware check
Checking for latest ATT firmware in flash ...
Newest firmware version available in flash is '05.05.58.00_ATT_005.026_000'
Modem firmware up to date
05.05.58.00_ATT_005.026_000
> modem firmware check
3. Use the modem firmware list command to list available firmware on the Connect IT 16/48
device.
>
modem firmware list
ATT, 24.01.544_ATT, current
Generic, 24.01.514_Generic, image
Verizon, 24.01.524_Verizon, image
ATT, 24.01.544_ATT, image
Sprint, 24.01.531-B003_Sprint, image
>
4. To perform an firmware update by using a local file, use the version parameter to identify the
appropriate firmware version as determined using the modem firmware check or modem
firmware list command. For example::
>
modem firmware update version 24.01.5x4_ATT
Updating modem firmware ...
-----------------------------
Successfully updated firmware
Modem firmware update complete
>
Digi Connect IT® 16/48 User Guide
Update cellular module firmware
Use the scp command
for
596
Advertisement
Table of Contents
