Table of Contents
Advertisement
Configure Connect IT using the web user interface
Setting
History size
Exclusive access
Idle timeout
6. Click Save.
Monitor serial port changes
You can choose to monitor CTS and/or DCD changes on the serial port.
1.
Log in to the Connect IT web
2. Click Configuration in the left pane.
3. Expand the Serial section.
4. Expand the port that you want to configure: Port 1, Port 2, Port 3, or Port 4.
5. Expand the Monitor section.
6. Configure the settings.
Setting
CTS
DCD
7. Click Save.
Enable a Telnet connection on the serial port
You can enable a Telnet connection on the serial port.
1.
Log in to the Connect IT web
2. Click Configuration in the left pane.
3. Expand the Serial section.
4. Expand the port that you want to configure: Port 1, Port 2, Port 3, or Port 4.
Digi Connect IT® 16/48 User Guide
Description
The number of bytes from the serial port which should be
buffered. The buffered bytes are redisplayed when a user
connects to the serial port.
The minimum value is 0.
The default is 4000.
Select this option if access to the serial port should be limited
to a single active section. If not selected, multiple active
sessions are available on the port.
The length of time after which the active session is
disconnected after a period of user inactivity.
Syntax: number{w|d|h|m|s}
A setting of 0 disables idle timeouts.
The default is 15m.
UI.
Description
Select the CTS option to monitor CTS changes on this port.
Select the DCD option to monitor DCD changes on this port.
UI.
Configure a serial port
33
Advertisement
Table of Contents
