Available Commands - Digi Connect IT 16 User Manual

Command line interface

Available commands

The following commands are available from the Admin CLI prompt:
Command Description
config Used to view and modify the configuration.
See
about using the config command.
exit Exits the CLI.
cp Copies a file or directory.
help
Displays:
See
command.
ls
Lists the contents of a directory.
mkdir Creates a directory.
modem
Executes modem commands.
more
Displays the contents of a file.
mv
Moves a file or directory.
ping
Pings a remote host using Internet Control Message Protocol (ICMP) Echo Request
messages.
reboot Reboots the Connect IT 16/48 device.
rm
Removes a file.
scp Uses the secure copy protocol (SCP) to transfer files between the Connect IT 16/48
device and a remote host.
See
show Displays information about the device and the device's configuration.
See
about the show command.
system
Issues commands related to system functionality.
traceroute
Sends and tracks route packets to a destination host.
update
Updates the device firmware.
Digi Connect IT® 16/48 User Guide
Device configuration using the command line interface
CLI editing and navigation commands, when executed from the root of the
n
Admin CLI prompt.
Available commands, syntax diagram, and parameter information, when
n
executed in conjunction with another command.
Display help for commands and parameters
Use the scp command for information about using the scp command.
Display status and statistics using the show command
Available commands
for more information
for information about the help
for more information
702