Table of Contents
Advertisement
Central management
Digi Remote Manager support
Digi Remote Manager is a hosted remote configuration and management system that allows you to
remotely manage a large number of devices. Remote Manager includes a web-based interface that
you can use to perform device operations, such as viewing and changing device configurations and
performing firmware updates. Remote Manager servers also provide a data storage facility. The Digi
Remote Manager is the default cloud-based management system, and is enabled by default. You can
also select to use Digi aView as the cloud-based management system. See
information about aView.
To use Remote Manager, you must set up a Remote Manager account. To set up a Remote Manager
account and learn more about Digi Remote Manager, go to
remote-manager.
To learn more about Remote Manager features and functions, see the
Guide.
Configure Digi Remote Manager
By default, your Connect IT 16/48 device is configured to use central management using Digi Remote
Manager.
Additional configuration options
These additional configuration settings are not typically configured, but you can set them as needed:
Disable the Digi Remote Manager connection if it is not required. You can also configure an
n
alternate cloud-based central management application.
Change the reconnection timer.
n
The non-cellular keepalive timeout.
n
The cellular keepalive timeout.
n
The keepalive count before the Remote Manager connection is dropped.
n
SMS support.
n
HTTP proxy server support.
n
To configure Digi Remote Manager:
WebUI
1. Log into the Connect IT 16/48 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
Digi Connect IT® 16/48 User Guide
Digi Remote Manager support
Digi aView User Guide
www.digi.com/products/cloud/digi-
Digi Remote Manager User
for
636
Advertisement
Table of Contents
