Table of Contents
Advertisement
User authentication
Example user configuration
Example 1: Administrator user with local authentication
Goal: To create a user with administrator rights who is authenticated locally on the device.
WebUI
1. Log into the Connect IT 16/48 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Users.
4. In Add User: enter a name for the user and click .
The user configuration window is displayed.
5. Enter a Password for the user.
6. Assign the user to the admin group:
a. Click Groups.
b. For Add Group, click .
c. For Group, select the admin group.
d. Verify that the admin group has full administrator rights:
i. Click Authentication > Groups.
ii. Click admin.
iii. Verify that the admin group has Admin access enabled. If not, click Admin access to
enable.
Digi Connect IT® 16/48 User Guide
Example user configuration
540
Advertisement
Table of Contents
