On-Line Help; Help Menu; Command-Specific Help - Digi PortServer II User Manual

On-Line Help

On-line help screens are available for the PortServer II's commands. Help is displayed
if you enter a "?" by itself or after part of a command line. The help screen will tell
you which parameters are available to complete the command line.

Help menu

Enter a "?" after the PortServer II prompt with no other parameters to get the top level
help screen, as shown below:
login: root
passwd:
#> ?
admin
exit
newpass
send
telnet
?
#>

Command-specific help

For help on a specific command, type the command name followed by a question
mark. The example below asks for help for the command info:
#> info ?
Displays or clears statistics tables.
syntax: info (table_name)|(table_cmd)
tables:
frame
udp
#> info
Note: After you enter a request for help, PortServer II prints the command before
the "?" for you on the next command line, anticipating that you will enter the
command next. For example, after the request for help with info? above,
notice how the next command prompt is followed by the word info.
Page 60
boot close
info kill
ping quit
set snmp
traceroute wan
ip icmp
clear
Basic Configuration
cpconf
mode
rlogin
status
who
tcp
90030500B