Dräger Babylog 8000 plus Instructions For Use Manual page 99

Displaying device information
 Open the dialog window by pressing the Cal.
Config. > Config keys.
Setting date and time
This setting is saved after the device is switched
off.
1 Open the dialog window by pressing the Cal.
Config. > Config > Clock keys.
2 Use the and
appropriate parameter.
The selected parameter is highlighted.
3 Use the and
Instructions for use Babylog 8000 plus SW 5.n
keys to select the
keys to set the value.
The following device information is displayed:
– Software version
– Optional enhancements
– Operating hours
– Reference conditions for flow measurement
and the sensor type being used
Configuration
99