Dräger Babylog 8000 plus Instructions For Use Manual page 90

Trends
Displaying trends
The progression of the following measured values
over the past 24 hours is stored in the trend
memory.
FiO Inspiratory O
2
Mean Mean pressure
MV Minute volume
C Dynamic compliance
R Resistance
RVR Ratio of respiratory rate to tidal volume
Indicator of chance of success upon
weaning the patient from ventilation
1 On the main screen, press the Trend key.
An segment of the trend memory is displayed. The
starting time and length of the segment can be
changed.
2 Select the desired measured value by pressing
the Param key.
3 Use the and
length of the segment (max. 24 hours, min.
2 hours). The times displayed indicate the
beginning and end of the segment.
4 Use the and
segment:
90
concentration
2
keys to select the
keys to shift the
A
A Located at the left end of the bar:
The segment is located at the beginning of the
trend memory.
B Located at the right end of the bar:
The segment is located at the end of the trend
memory.
Instructions for use Babylog 8000 plus SW 5.n
B