Operation Key; Mode Select - Fuji Electric Faldic-a RYS-R Series User Manual

(2) Operation key

Change the mode (MODE).
MODE MODE MODE MODE
Returns from the mode (ESC).
ESC ESC ESC ESC
Selects the sub-mode.
Decreases the figure (-1).
When a figure decreases from 0 to 9, the figure
on the one higher digit decreases by one.
Pressing the
MODE MODE
MODE MODE
ESC ESC ESC ESC

(3) Mode select

Each mode can be selected by the MODE key.
Mode select
Power on
Sequence mode
Monitor mode
Parameter edit mode
Positioning data edit mode
Test running mode
key while pressing the
SHIFT SHIFT
SHIFT SHIFT
Sub-mode select
MODE MODE MODE MODE
ESC ESC ESC ESC
MODE MODE MODE MODE
ESC ESC ESC ESC
MODE MODE
MODE MODE
ESC ESC
ESC ESC
MODE MODE
MODE MODE
ESC ESC
ESC ESC
MODE MODE
MODE MODE
ESC ESC
ESC ESC
SHIFT SHIFT SHIFT SHIFT
ENT ENT ENT ENT
key changes over the indication between the higher 4 digits and lower
4 digits.
ENT ENT ENT ENT
Indication example
← ← ← ← For RYS-R type amplifier, the positioning
data edit mode is invalid.
(Mode indication only)
7-2
Moves the cursor to the right at data change
(SHIFT).
Stores the mode and figure (ENT). Press more
than 1 [s] to store the data.
Selects the sub-mode.
Increases the figure (+1).
When a figure increases from 9 to 0, the figure on
the one higher digit increases by one.
MHT260a (Engl.)