Test Running Mode; Manual - Fuji Electric Faldic-a RYS-R Series User Manual

7.7 Test running mode

In the test running mode, keying on the keypad panel can rotate the motor or reset the different items.
Upon displaying [
: Manual feed
: Origin return
: Position preset
: Alarm reset
(1) Manual feed (
So long as a key on the keypad panel is pressed, the motor rotates. The motor speed is as set by basic para. 1.
ENT (1 [s] or more)
* So long as the ∧ key or ∨ key is pressed, the motor rotates
While the motor is rotating by a control input/output signal,
indications other than [
(2) Origin return (
Keying on the keypad panel performs an origin return. The origin return is made according to basic para. 72 to 77. Change of basic para.
72 and 73 settings is valid only after turning off and on power.
ENT (1 [s] or more)
After the end of origin return, the indication remains [
] by the MODE key, holding down the ENT key for at least 1 [s] executes a test running.
)
ESC
ESC
] cannot be selected.
)
ESC
ESC
: History initialization
: Parameter initialization.
: Positioning data initialization
: Automatic offset addjust
ENT
∧
∨
Indicates rotating in positive direction
Indicates rotating in negative direction
ENT
ENT
ESC
]. Pressing the ESC key resumes a sub-mode selection.
7-19
Return end
MHT260a (Engl.)