Commercial Power Supply; Power Supply Capacity; Harmonics Suppression - Fuji Electric Faldic-a RYS-R Series User Manual

4.2 Commercial power supply

Supply commercial power to the amplifier.
(1) Power supply
(a) 200 [V] 3-phase input voltage of amplifier
Supply 200 [V] commercial power to the amplifier.
Connect it to terminals L1, L2 and L3.
• Voltage : 200/200-220-230 [V] +10%/ -15%.
• Frequency : 50/60 [Hz]
• Phase : 3-phase (main circuit power supply) / single-phase (control power supply)
(b) 100 [V] single-phase input voltage of amplifier
Supply 100 [V] commercial power to the amplifier.
Connect it to terminals L1 and L2.
• Voltage : 100 to 115 [V] +10％/ -15％
• Frequency : 50/60 [Hz]
• Phase : Single-phase (main circuit and control power supply)

(2) Power supply capacity

The power supply capacity required for each amplifier is as follows.
The power supply capacity is applied for cabling with specified cable and 20 [m] max. wiring length. If the power capacity is 500 [kVA] or
more, AC reactor for impedance matching should be provided. See 10.5 AC reactor (reactor for impedance matching).
(a) 200 [V] 3-phase input voltage of amplifier
Amplifier type RYS□□□S3
Motor type (example) GYS□□□DC1-
S8B, SB or SA
Motor output
Power capacity
(b) 100 [V] single-phase input voltage of amplifier
Amplifier type RYS□□□S3-
Motor type GYS□□□DC1-
(example)
Motor output
Power capacity

(3) Harmonics suppression

If a (harmonics suppressing) reactor is connected to RYS type amplifier, see 10.5 AC reactor or 10.7 DC reactor.
500 101
500 101
S8B SB
[kW] 0.05 0.1
[kVA] 0.15
500 101
＊＊＊6
500 101
S8B, S6B
S8B S6B
[kW] 0.05 0.1
[kVA] 0.15 0.6
201 401 751 102
201 401 751 102
SA
0.2 0.4 0.75 1
0.6 1.2 1.8 3
201
201
0.2
1.2
4-6
152 202 302 402
152 202 302 402
1.5 2 3 4
4.5 6 9 10
MHT260a (Engl.)
502
502
5
15