Example Of Editing - Fuji Electric Faldic-a RYS-R Series User Manual

■ Example of editing

Let us change the setting of basic para. 2 "Manual feed speed 2" to 1.0.
Key operation
MODE MODE MODE MODE
ESC ESC
ESC ESC
MODE MODE MODE MODE
ESC ESC
ESC ESC
SHIFT SHIFT SHIFT SHIFT
ENT ENT
ENT ENT
1 [s] or more
SHIFT SHIFT SHIFT SHIFT
ENT ENT
ENT ENT
SHIFT SHIFT SHIFT SHIFT
ENT ENT
ENT ENT
MODE MODE MODE MODE
ESC ESC
ESC ESC
SHIFT SHIFT
SHIFT SHIFT
ENT ENT ENT ENT
SHIFT SHIFT
SHIFT SHIFT
ENT ENT ENT ENT
1 [s] or more
Indication
Blink
Blink
Blink
Blink
Remarks
The feedback speed monitor is displayed.
Resumes the mode selection.
Press the MODE key for selecting the parameter. edit mode.
Hold down the ENT key for at least 1 [s] for display the para. 01.
Select the basic para. 2.
Pressing the ENT key reads the setting contents.
The LSD blinks. (Two MSDs of initial value 500.00 are displayed.)
Decrease the value to 0.
Press the MODE key holding down the SHIFT key to display the L side
(low order 4 digits).
Press the SHIFT key to shift the cursor to the adjacent digit on the right.
Set the value to 1. Likewise, change the LSD to 0.
Hold down the ENT key for at least 1 [s] to store the new value.
Storing the value keeps it displayed. Pressing the ESC key resumes
the para. number selecting screen.
7-16
MHT260a (Engl.)