Mounting Instruction Of Gyn And Grn Type Gear-Head Unit; Greasing To The Shaft Extension; Preparation For Mounting - Fuji Electric Faldic-a RYS-R Series User Manual

(c) Perpendicularity of mounting face of flange to shaft for flange-mounted motor
The indicator is fitted rigidly on the shaft extension.
(a)
Flange-mounted
0.02

(8) Mounting instruction of GYN and GRN type gear-head unit

(a) Greasing to the shaft extension
Apply grease lightly to the output shaft extension of the motor, before
mounting a GYC or GYS motor to gear-head unit.
(b) Preparation for mounting
Remove the rubber cap from a deep point of the flange face of the
gear-head unit.
(c) Match the position of the key of the gear-head input-shaft with
the position of the rubber cap hole.
Loosen the "hexagonal socket headed lock screw", which is located
in the rubber cap hole. The hexagonal socket headed lock screw is
positioned on the gear-head input-shaft.
(b)
Flange-mounted
0.06
Lightly greased
Gear-head unit
[unit : mm]
(c)
Flange-mounted
0.08
3-3
Motor
Rubber cap
Hexagonal socket headed
lock screw
MHT260a (Engl.)