Sequence Mode - Fuji Electric Faldic-a RYS-R Series User Manual

7.3 Sequence mode

In the sequence mode, the amplifier current status and the alarm detection history can be displayed.
Press the MODE key to display [
: Sequence
: Sub-mode
: Alarm detection
: Alarm history
: Amplifier setting
: Motor setting
: Station No. indication
(1) Sequence
Indicates the amplifier output signal status and operation status.
Speed zero
Speed arrival
Ready
Indexing end
Deviation zero
Forced stop detection
* The corresponding LED goes on when the above
each output signal is on.
Remark : When power is applied to the amplifier, the sequence of the sequence mode is displayed. The type of indication at power on can
be changed by system para. 89 setting.
] and then press the ENT key for more than 1 [s].
ENT (1 [s] or more)
ＥＳＣ
Indication Description
In base-off condition, the motor has no driving force and in
free-run status. (Figure above)
The motor can rotate.
The amplifier has received a forced stop signal and stops with
the speed zero signal.
7-5
MHT260a (Engl.)