Safety Instructions; Symbols; Warning Display - Fuji Electric Faldic-a RYS-R Series User Manual

SAFETY INSTRUCTIONS

In all stages of the basic planning of this equipment, its transport, installation, operation, maintenance and check, reference must be made to
this manual and other related documents. The correct understanding of the equipment, information about safety and other related
instructions are essential for this system.
Cautionary indications DANGER and CAUTION are used in this manual to point out particular hazards and to highlight some unusual
information which must be specially noted.
Cautionary indications
DANGER
CAUTION
Pictorial symbols are used as necessary.
Pictorial symbol Description
Do not disassemble

Warning display

The warning display in Fig. B is located at the arrows in Fig. A.
Fig. A
Fig. B shows following contents :
There is a risk of electric shock.
Do not touch the amplifier when a commercial power is applied and for at least five minutes after de-energization.
Be sure to ground {applicable for Japan only : grounding equal to 3rd class grounding structure of Japanese standard
(grounding resistance 100 [Ω] or less)} must be connected with the terminal marked "
Description
Indicates that death or severe personal injury will result if proper
precautions are not taken.
Indicates that personal injury or property damage alone will result if
proper precautions are not taken.
Pictorial symbol
Warning display
( i )
Description
Electrical shock hazard warning
Fig. B
".
MHT260a (Engl.)