Switching And Crosspoint Settings; Query The Video Crosspoint State; Switching An Input To An Output; Switching An Input To All Outputs - Lightware MX2-8x8-HDMI20-L User Manual


  
7. LW3 Programmers' Reference
8.4. Switching and Crosspoint Settings
INFO: The current setting can be queried by using the
8.4.1. Query the Video Crosspoint State
Command and Response
Ý GET·/MEDIA/XP/VIDEO.DestinationConnectionStatus
pr·/MEDIA/XP/VIDEO.DestinationConnectionStatus=<out1_state>;<out2_state>;...;<out8_state>
Ü
Parameters
The <out#_state> parameters mean the output ports (O1, O2 etc.) one after the other. The value of the
parameter shows the input port switched to the given output port.
Example
Ý GET /MEDIA/XP/VIDEO.DestinationConnectionStatus
Ü pr /MEDIA/XP/VIDEO.
DestinationConnectionStatus=I1;I1;I1;I1;I1;I1;I1;I1;I1;I1;I1;I1;I1;I1;I1;I1;I1;I1;I1;I1;I1;I1;I1;I1;
I1 input port is connected to all output ports.
8.4.2. Switching an Input to an Output
Command and Response
Ý CALL·/MEDIA/XP/VIDEO:switch(<in>:<out>)
Ü mO·/MEDIA/XP/VIDEO:switch=OK
Example
Ý CALL /MEDIA/XP/VIDEO:switch(I4:O1)
Ü mO /MEDIA/XP/VIDEO:switch=OK
8.4.3. Switching an Input to All Outputs
Command and Response
Ý CALL·/MEDIA/XP/VIDEO:switchAll(<in>)
Ü mO·/MEDIA/XP/VIDEO:switchAll=OK
Example
Ý CALL /MEDIA/XP/VIDEO:switchAll(I1)
Ü mO /MEDIA/XP/VIDEO:switchAll=OK
TIPS AND TRICKS: All output ports can be disconnected by the '0' value:
CALL /MEDIA/XP/VIDEO:switchAll(0).
GET command.
MX2-HDMI20 series – User's Manual
8.4.4. Multiple Switching
The whole crosspoint can be set by sending one command as follows.
Command and Response
Ý CALL·/MEDIA/XP/VIDEO:switchMulti(<out1_source>;<out2_source>;...;<out8_source>)
Ü mO·/MEDIA/XP/VIDEO:switchMulti=OK
The source is not required to set on all output ports (see the Example2).
Parameters
The <out#_source> parameters mean the output ports one after the other. The value of the parameter shows
the input port switched to the given output port.
Example1
Ý CALL /MEDIA/XP/VIDEO:switchMulti(I1;I2;I3;I4;I5;I6;I7;I8)
Ü mO /MEDIA/XP/VIDEO:switchMulti=OK
Example2
Ý CALL /MEDIA/XP/VIDEO:switchMulti(I1;I2;;;I5)
Ü mO /MEDIA/XP/VIDEO:switchMulti=OK
56