Control Menu; Crosspoint Switching; Muting The Outputs; Locking The Outputs - Lightware MX9x9DVI-Plus User Manual


  
5. Software Control - The Built-in Web
5.2. Control Menu
5.2.1. Crosspoint Switching
After connecting to a new device, this menu appears by default. 1; 2;
3... columns represent the inputs, and the 1; 2; 3... rows represent the
outputs. Each green square represents a live connection. Click on the
desired grey square to make the connection. When the mouse pointer
hovers over the array, the corresponding input and output numbers are
highlighted in red to help to switch.
5.2.2. Muting the Outputs
Outputs can be easily muted by clicking the button titled 'M' beside
the output. This means that no signal will be present at this output. If
muting is active the background turns to black.
5.2.3. Locking the Outputs
Outputs can be locked to any inputs. After locking an input to an output
no switching is permitted for that output unless it is unlocked again. If
the port is locked, the background turns to red.
ATTENTION! Loading a preset does not change either the lock state
or the switch state of a locked output. If an output was locked to
an input before preset loading, it will also be locked that input after
preset loading, so locked outputs ignore the preset.
5.2.4. Preset Operations
Preset operations can be done in the right panel of the Control / Set
and View Crosspoints page. Lightware matrix routers have 32 preset
memories which can be loaded and saved any time.
INFO: A preset setting stores a full configuration of all outputs, so
preset loading have an effect on every output, except the locked
ones.
Saving a Preset
Step 1. Arrange the desired configuration on matrix switching area.
Step 2. Select the desired preset memory location.
Step 3. Press the Save Preset button. A message box confirms that the
preset is stored.
Loading a Preset
Step 1. Select the preset memory location (Preset1...Preset32) you want
to load as next configuration.
Step 2. Press the Load Preset button. Now the preset is loaded
Step 3. The new I/O configuration is displayed on the matrix switching
area.
MX DVI-Plus Series – User's Manual
The Crosspoint Menu
19