What Do I Do If The Ecc800 Webui Display Language Changes From Chinese To English During Use; How Can I Rectify Camera Access Restriction - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Check whether the DO port is used.


Step 3 After changing the DO port state to idle, associate the DO port again. If the association still
fails, contact Huawei technical support.
----End
9.1.17 What Do I Do If the ECC800 WebUI Display Language
Changes from Chinese to English During Use?
Context
Cause: The browser cookies are deleted.
Procedure
Step 1 Manually refresh the browser page.
----End

9.1.18 How Can I Rectify Camera Access Restriction?

Prerequisites
If Huawei S12700 series switch is used, refer to this section to rectify the fault. For more
information, consult network engineers.
Context
The camera is inaccessible after the MAC address and IP address are bound in network
configuration.
Procedure
Step 1 Use the free-rule configuration method. Configure the free-rule MAC address so that users
can access the network without authentication. For the configuration method, see the section
authentication free-rule in
----End
Issue 02 (2019-02-28)
Choose System Settings > Alarm Parameter Settings > Alarm Linkage and check
whether the DO port is used.
Choose System Settings > PLC and check whether the DO port is used.
Copyright © Huawei Technologies Co., Ltd.
S12700 V200R008C00 Product Documentation.
9 FAQ
207