The configuration interface consists of the following components:
(1) The numeric buttons
These are used to select menu choices and enter numeric values.
(2) LED screen
Displays current situation. See
(3) LED
Light indicating that the user interface is switched ON.
(4) ON button
Switches the user interface on.
(5) The Navigation buttons
The arrow buttons allow you to highlight menu options.
(6) The Back button
Exits a menu and returns you to the previous level.
(7) The Accept button
Accepts an operation or setting.
(8) Service menu button
Provides a number of commands used most commonly by the service personnel. See
The Service Settings menu
(9) Settings menu button
Allows you to define operational settings. See
(10) Action menu button
Allows you to issue a number of operating instructions. See
99).
Turfmow 1000 Technician's Manual
Figure 94: Components of the user interface
The LED screen
(page 107)
Version: Release 3.5
(page 98).
The Settings menu
(page 100).
The Actions menu
Last updated: 2018-12-20
Chapter 8 Using your robot
(page
97