Table of Contents
Advertisement
Chapter 16 Winter service check list
Tests after service
OK/NOK
If NOK, indicate why
Software version 3.5
Height of cutting head
(mm)
Check history on Myrobot
Service tests after service
OK/NOK
If NOK, indicate why
Charge
Bumper
Smartbox
Lift Sensors
Backward Sensors
Signal Sensors
Drive Motor
Cutting Motor
Sonar Sensors
Lid
Do 2 cutting height tests: highest/
lowest/in_use and check all heads
go to correct height
Trajectory check: select a trajectory
along a straight line 20..30m
long without obstacles - check in
particular if straight line followup (if
possible)
Noise: start the machine - report
abnormal levels/noises (wheels,
cutting heads,body vibrations,....)
Noise:report any abnormal noise
from the cutting height motors
Remarks and Replaced parts
Turfmow 1000 Technician's Manual
Version: Release 3.5
Last updated: 2018-12-20
199
Advertisement
Table of Contents
