Chapter 10 Connecting to robots
10 Connecting to robots
Communication with a robot is available through:
•
Hands-on human-machine interaction
•
Remote access via the web server
Hands-on human-machine interaction
This type of communication refers to the direct operation of the robot using the user interface
provided.
All the operations available are described in
Note: There are some instructions which can only be issued using this method of
communication.
10.1 Remote access via the web server
This method of communication allows a user to connect to the robot using a smartphone,
tablet or PC via a web server using the internet.
Each Turfmow 1000 machine can send data to and can receive commands from the web
server. A user can also receive information from the server and send commands to it, which
will then be transferred to the robot.
The means of communication between the user, the robot and the web server are shown in
the figure below.
146
Turfmow 1000 Technician's Manual
(page 146)
(page 146).
Figure 100: Human Machine Interaction
The user interface
Figure 101: Remote access via the web server
Version: Release 3.5
(page 96).
Last updated: 2018-12-20