Yamabiko ECHO Robotics Turfmow 1000 Technician Manual page 92

Chapter 7 Installation
10. Select
11. Select the parcel associated with the LOOP wire.
12. Select
this field, it will just follow the wire to reach the station.
13. Select
14. Press
15. Select each of the other parcels in turn. In all of these cases set
16. For Wire 3 parcel, select
17. Press
18. Select
for the other parcels as required based on the relative sizes of the fields.
19. Select the newly created field and press
20. Press
21. Select
22. A name is generated which you can modify if required.
23. Select
LOOP field and check the button ON.
24. Select
wire.
92 Turfmow 1000 Technician's Manual
.
Parcels
and check the button OFF. This ensures that when the robot is in
Use trackborder
and check the buttons next to Wire 1 and Wire 2.
Neighboring parcels
to return to the Parcels list.
Neighboring parcels
to return to the Parcels list.
Edit parcels percentage
to return to the Infrastructure men.
>
Stations Create new station
. A list of parcels is presented. Select the parcel inside the
Connected to parcels
Station inside parcel's wire
and check the button next to Wire 4.
. Set the value for the LOOP parcel to 0%. Set the values
.
.
. Check the button ON if the station is inside the LOOP
Version: Release 3.5
to ON.
Use trackborder
Last updated: 2018-12-20