Chapter 11 Service and Maintenance
2.
Replace the blades.
3.
Use a torque of 2Nm to tighten the screws.
Aluminum anti-friction disk
1.
Check that it turns smoothly.
2.
Unscrew the 4 screws to remove the white plastic ring shown below.
3.
Remove the axle.
4.
Inspect and clean the disc.
5.
Replace the disc if damaged.
6.
Place the axle firmly back into the sleeve.
7.
Attach the white plastic ring using the 4 screws.
8.
Place the blade support disc over the axle and replace the circular washer.
176
Turfmow 1000 Technician's Manual
Version: Release 3.5
Last updated: 2018-12-20