Chapter 6 How Turfmow 1000 works
At point A, the robot decides to return to the charging station. It then moves towards the
border
(page 201) and follows the track border of the single mowing field until it reaches
point B, which is where the two wires overlap. It then follows the station loop wire until it
arrives at the charging station.
Once the robot has arrived at the charging station, it enters
6.1.2.4 Multiple mowing fields with station loop
This chapter describes how the robot returns to the charging station, through a series of
mowing fields, using a
28
Turfmow 1000 Technician's Manual
Figure 22: Return to station using a station loop
station loop
(page 201) to locate the station.
Version: Release 3.5
Charge mode
(page 29).
Last updated: 2018-12-20
track