Yamabiko ECHO Robotics Turfmow 1000 Technician Manual page 101

Cutting heads
Enable/disable specific cutting heads
Border
Sets the
Cutting height
Adjusts
System locking
Implements
Schedule
This command enables you define the times during the week when the robot will mow the
grass.
• A mowing schedule can be defined for each day of the week.
• A number of mowing periods can be defined for each day and each parcel.
• Each defined period can be active (implemented) or inactive (ignored).
• A schedule for one day, and for one parcel, can be copied to other days of the week.
• The complete schedule can be ignored and the robot set to work at all times.
To define a mowing schedule
Note: By default when the robot is delivered, the schedule is set to work continuously.
1.
Press
2.
Press the up
A screen like the one below will appear. In the example below, there are two columns for
each day because there are two parcels that have been defined. This shows the current
schedule, where the white blocks represent the time when the robot will be operating in
one parcel.
3.
Use the arrow keys to highlight
The following screen appears.
Turfmow 1000 Technician's Manual
number of times the border mode is used each week
Note: This option is only available for a single field installation which uses a
positioning beacon to locate the charging station.
the cutting height of the blades
a PIN code before a command can be executed
.
and down
Note: By default all the time periods will appear white, meaning the robot will
work continuously.
Version: Release 3.5
(page 103).
(page 105).
arrows to highlight
Schedule
and press .
Edit
Chapter 8 Using your robot
(page 104).
(page 106).
, then press .
Last updated: 2018-12-20 101