Yamabiko ECHO Robotics Turfmow 1000 Technician Manual page 166

Chapter 11 Service and Maintenance
See also:
Clean the cutting disk
This procedure should be performed weekly.
Clean the cutting disc using a brush. If compressed air is available, this is preferable.
Check that it rotates smoothly. If there is a problem contact an authorized technician.
Check the cutting blades
The condition of the cutting blades is the essential for a satisfactory mowing operation.
The service life of the blades depends on:
• the amount of time they have been in operation,
• the working area they need to cover,
• the type of grass and soil,
• the presence of obstacles/objects on the ground such as fallen fruits, pebbles, toys, ...
Every week you should inspect:
- the blades,
- the blade bolts,
- the cutter assembly.
Cutter assembly parts should be replaced every every six months or whenever they are
damaged.
Rotate the disc, so that the screw head holding the blade is visible.
166 Turfmow 1000 Technician's Manual
adjusting the height of the cutting head (page 98).
Version: Release 3.5 Last updated: 2018-12-20