Chapter 11 Service and Maintenance
6.
Remove the motor.
7.
Remove plastic covers.
8.
See the
9.
Replace plastic covers.
10. Replace the motor.
11. Replace the housing - correct orientation is assured by the position of the screw holes.
12. Tighten the screws to 15Nm.
13. Re-connect the cables.
14. Replace the back plate. Tighten the bolts to 6Nm.
15. Put the washers back in the correct orientation (flat side towards axle, curved side
towards wheel).
16. Clean the axle.
17. Grease the axle.
182
Turfmow 1000 Technician's Manual
video on YouTube for the
greasing.
Version: Release 3.5
Last updated: 2018-12-20