Table of Contents
Advertisement
Chapter 8 Using your robot
This figure indicates that all the cutting heads are enabled.
3.
Press the number key(s) that corresponds to the cutting head(s) you wish to enable/
disable.
4.
Press
5.
Press
Note: To enable a disabled cutting head, repeat the procedure above, selecting the
disabled head.
Border
Sets the number of times the border mode is used each week. The border mode will be
implemented at regular intervals during the week.
Note: This option is only available for a single field installation with a positioning
beacon.
To set the number of border mode operations per week
1.
Press
2.
Press the up
The following screen appears.
3.
Use the left and right arrow keys to scroll to the required number of border modes per
week.
104
Turfmow 1000 Technician's Manual
Note: Pressing
on the numeric keypad will select all the cutting heads.
0
.
to return to the main menu.
.
and down
arrows to highlight
Border
Version: Release 3.5
then press
.
Last updated: 2018-12-20
Advertisement
Table of Contents
