Yamabiko ECHO Robotics Turfmow 1000 Technician Manual page 110

Chapter 8 Using your robot
Using the robot as a client
For normal operation it is recommended that you set up the robot as a WiFi client. This will
enable it to communicate with the portal on the web-server.
To set up the robot as a client
1.
Press
2.
Highlight
3. Highlight
If the robot has not been connected to a WiFi network, selecting the option
networks
4.
Highlight the WiFi network required and press
5. Enter the password for the network using the keyboard.
6.
Highlight
8.3.4.3 Operations
This menu enables you to set a number of operating parameters: .
Min temp
Sets the lowest temperature that the robot will operate at.
Edit parcels percentage
This option enables you to view and modify the
to each of the parcels that have been defined. The percentage value assigned to a parcel
determines the proportion of times the robot will start mowing in the parcel.
To set the operating parameters
1.
Press
2.
Press the arrow keys to highlight
3.
Use the up
4. Enter the required value.
5. Check the current values have been updated.
6.
Press
8.3.4.4 Device
This menu displays the characteristics of the device and enables you to change the robot's
name.
110 Turfmow 1000 Technician's Manual
.
and press
Connections
and set it to
Mode
will search for networks and present a list of those available.
and press .
V
Note: Mowing at too low a temperature can damage the grass.
.
and down
to return to the main menu.
.
.
Client
.
percentage values
, then press
Operations
arrows to highlight the required parameter (see above).
Version: Release 3.5
Search for
(page 201) assigned
.
Last updated: 2018-12-20