Table of Contents
Advertisement
Chapter 4 Turfmow 1000 description
(3) Occupation sensor. This is an optional feature indicating that the charging station is
occupied in charging a robot. This is useful when there are multiple robots in the field.
(4) LED display which indicates the current state of the station:
• Green - blinking: station is operating normally.
• Red - blinking: no peripheral wire can be detected.
This could be because the wire has been cut or that it is too long.
• Red - steady: indicates a problem.
This could be due to the wire being too short, less than 200m, or there is a problem with
the electronics.
(5) Identification label.
(6) Input for power cable.
(7) Inputs for peripheral cables.
Technical details
Details of the charging station can be seen on the identification label.
16
Turfmow 1000 Technician's Manual
Figure 11: Rear view of the charging station
Figure 12: Charging station identification label
Version: Release 3.5
Last updated: 2018-12-20
Advertisement
Table of Contents
