Chapter 8 Using your robot
Operations when the robot is at the charging station
Use these operations to override the regular operating schedule.
1 Mow now
Leave the charging station and continue mowing.
2 Mow after charge
Remain in the charging station until the battery is charged and then start mowing.
3 Stay in station after charge
Stay in the charging station until a new command is issued.
4 Border
Mow in
4. Mow now on ...
Leave the charging station and continue mowing in a specific parcel. A list of parcel
appears in which you can choose the required one.
To execute the operations
1.
Click
2.
Press the up
numeric key that appears in front of the command.
3.
Press
4.
Close the lid.
8.3.3 The Settings menu
These commands enable you to define settings that control the operation of the robot.
Schedule
Sets
the weekly mowing schedule
100
Turfmow 1000 Technician's Manual
Note: If the lid is not closed within 10 seconds, the operation is canceled and you
will need to repeat this procedure.
Note: If the operation does not start even if the lid appears to the closed see
Correcting lid closure problems
border mode
(page 30) and then return to the charging station.
Note: This option is only available for a single field installation with a positioning
beacon.
Note: This option only appears for a multi-field installation.
.
and down
.
Note: If the lid is not closed within 10 seconds, the operation is canceled and you
will need to repeat this procedure.
Note: If the operation does not start even if the lid appears to the closed see
Correcting lid closure problems
(page 189).
arrows to highlight the required command, or press the
(page 189).
(page 101).
Version: Release 3.5
Last updated: 2018-12-20