Measured Values Pool; Process Flowchart; Connectivity; Pool Settings - ProMinent DULCOMARIN 3 Compact Assembly And Operating Instructions Manual

Operating the device

9.9 Measured values pool

9.10

Process flowchart

9.11

Connectivity

9.12

Pool settings

9.12.1

ECO mode parameters

9.12.2

Timer details operating mode

9.12.3

Background image, pool geometry, pool name

80
'Measured values pool' entry takes you to 'Measured values
The
pool' (depiction of all measured variables for the selected pool).
Here you can then read all parameters or configure all parameters
according to your user rights.
In the Process flowchart menu you can see the relationships
between the various components of the entire process and activate
or deactivate various functions, such as filter backflushing, circu‐
lating pump etc.
Here you can see, assign, configure and set parameters for all
installed and networked CAN components. You are guided through
the various settings in a manner sensitive to your context.
Here you can set the parameters for your Eco!Mode. Eco!Mode
operating mode reduces the energy consumption of the filter
pumps. In this respect, note the applicable national regulations,
laws and standards.
To discover how to set Eco!Mode, go to
level' on page 25
'timer' parameters for your 'Eco!Mode' and
Here you can set the
'superchlorination' operating modes.
In this respect, note the applicable national regulations, laws and
standards.
To discover how to set Eco!Mode and superchlorination, go to
Ä Chapter 3.2.2.3 'Detail level' on page 25
You can set the following parameters here:
Background image
n
Pool geometry
n
Pool name
n
The pool geometry is included in the controller's calculations as a
parameter.
Ä Chapter 3.2.2.3 'Detail