Setting Meter Preferences - Larson Davis SoundAdvisor 831C Reference Manual

9.4.6 Setting the External Shutoff Voltage

9.5 Setting Meter Preferences

9.5.1 Selecting a Microphone Correction
SoundAdvisor Model 831C
On your 831C, go to Tools
until the Power tab displays.
If desired, you can customize the external shutoff voltage. When the voltage of an external
battery drops below this value, the 831C shuts off to prevent damage to the external
batteries.
The default voltage is 10.8 volts. To customize this setting, enter a value
LEARN MORE
between 10–25 volts if your battery usage is other than a standard 12V SLA
battery. For more information, see Table A.5 on page A-7.
In this section:
• 9.5.1 Selecting a Microphone Correction
• 9.5.2 Enabling or Disabling AC Output
• 9.5.3 Enabling the Reset Prompt
9.5.4 Setting the Data Storage Location
•
• 9.5.5 Enabling GPS Mode
• 9.5.6 Customizing the Display Color Theme
The 831C can automatically apply corrections to a measurement to account for an
environmental shroud or a specific microphone as shown in this section.
Step 1.
On your 831C, go to Tools
//*
softkey (
3

System Properties, then press the right softkey (
3
 System Properties, then press the right
) until the Preferences tab displays.

Setting Meter Preferences

//*
)
85